Published at Monday, 19 February 2018. Curtain Design. By kruzz.
Curtain tracking can be attached to solid or false/drop down ceilings using screws or clips. Attaching the tracking to a solid ceiling requires the use of screws; screw directly into ceiling studs whenever possible. Holes will need to be drilled into the tracking at each attaching point. It is not always possible to screw into a stud. When this occurs, the use of an anchor is necessary. An anchor is pressed into a pre-drilled hole. As a screw is inserted into the anchor; the anchor expands and grabs firmly to the ceiling. Drop down/false ceilings require clips which are attached to the ceiling grid. There is a hole tapped into each clip that accepts a screw from the curtain tracking. These clips should be placed every 30.
Prior to installation, the job should be laid out on the floor in its intended position with all fittings properly located. This will prove valuable in determining whether all required parts are on hand and ensures proper location and placement.
Once a style is determined, calculate the height and length of the curtain necessary to cover the intended space. The length should generally be 15% wider than the length to be covered. For a more ruffled look, add 30% to the length. For example: you require 220 of length to cover your space. You would then multiply 220 x .15 and come up with 33; add the 33 to the original 220 and you will need to order a length of 253.
Any content, trademark’s, or other material that might be found on the mizoramexpress website that is not mizoramexpress’s property remains the copyright of its respective owner/s. In no way does mizoramexpress claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 mizoramexpress. All Rights Reserved.