Published at Sunday, 18 February 2018. Curtain Design. By kruzz.
Quality curtain tracking is made of 16 gauge extruded aluminum and is typically sold in eight foot lengths. If shorter lengths are required, tracking may be easily cut down with a hacksaw. Curves pre-bent to 45 deg. and 90 deg. are available for applications requiring the curtain to bend around a room; curves are 2 feet by 2 feet and bent at a 12 inch radius.
Prior to installation, the job should be laid out on the floor in its intended position with all fittings properly located. This will prove valuable in determining whether all required parts are on hand and ensures proper location and placement.
Anodized aluminum splicing clamps join multiple pieces of tracking to ensure proper alignment of the channels. This will allow the carriers/rollers to move freely from one piece of tracking to the next. Clean and smooth the ends of each piece of track before assembly; burrs may cause the carriers/rollers to hang up.
Any content, trademark’s, or other material that might be found on the mizoramexpress website that is not mizoramexpress’s property remains the copyright of its respective owner/s. In no way does mizoramexpress claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 mizoramexpress. All Rights Reserved.